Registering Your New Sensor
This guide will help you register a new sensor in the AlertAQ™ Platform. The steps are quick and simple. Follow along with these steps:
Step 1: Log in to AlertAQ
Start by logging in to the AlertAQ™ Platform or AlertAQ™ app. Enter your username and password in the required fields and click on the "Login" button. You will need to create an account if you do not yet have one.
Step 2: Go to the Sensors Menu
Once you're logged in, find the Sensors menu on the left side of the screen. Click on "Sensors" to open the this screen.
Step 3: Add Sensor
In the Sensors screen, you'll see an "Add Sensor" option near the top right corner. Click on it to start the sensor registration process.
Step 4: Enter the Serial Number
You'll then need to enter the serial number of the sensor you want to register. You can also scan the QR code for the serial number if it's available. Enter the serial number in the provided field.
Step 5: Follow the Registration Prompts
After entering the serial number, follow the registration prompts on the screen. These prompts will guide you through the rest of the registration process.
Note: If you have not yet created a property or location, you'll be prompted to do so during the sensor registration process.
Step 6: Register Additional Devices (Optional)
Once you've registered the Sensor Relay, you can register additional companion devices, such as the Flowie-O or Floodie, by following the same steps. Remember, you'll need to register each device separately using its serial number.
If you have any issues, don't hesitate to reach out for help through chat or email at hello@alertlabs.com
Wrong dashboard interface in this guide? Check out our guide for the Alert Labs Legacy Dashboard here instead!