If you're deploying the Alertlabs Floodie and Shuttie devices at your property, you have the option to pair them to shut off the water valve whenever water is detected by floodie. Here's a step-by-step guide on how you can configure this feature:
Step 1 - To start, log in to the AlertAQ portal using your credentials.
Step 2 - Once you are logged in, look for the 'Sensors' tab in the left navigation panel and click on it.
Step 3 - You'll see a list of all your connected devices. Click on the Shuttie device that you wish to set up for automated shut-off response. A panel will open up on the right side of the screen with detailed information about the selected device.
Step 4 - Scroll down and find the 'settings' option. Click on it and you'll be redirected to the settings page of the selected Shuttie device.
Step 5 - In the settings page, look for the 'Sensor Settings' section and expand it.
Step 6 - Find the 'General' section.
Step 7 - To allow the Shuttie to automatically shut off the water system, switch on the toggle for the 'Auto Shut off' option.
Step 8 - You now need to assign which Floodie/Flowie O sensors will trigger this shut-off action. Pick and select the Floodies/Flowie O from the list. This can include all Floodie/Flowie O devices or just specific ones depending on your property requirements.
Step 9 - After making sure that you've selected all your needed devices and features, click on the 'Save' button to finalize your settings.
Remember, if you're ever having trouble, please don't hesitate to contact us through chat or by email at hello@alertlabs.com to ask for assistance.